4', 5', 8', 10' LONG 18" WIDE CONNECTING PLANK ( 8' long model shown )
TOOL TRAY mounted on PARTIAL HANDRAIL
PIVOTING TOOL TRAY
PARTIAL HANDRAIL
ACCESSORIES
| 8' LONG - 10" WIDE CONNECTING PLANK |
4', 5', 8', 10' LONG 18" WIDE CONNECTING PLANK ( 8' long model shown ) |
TOOL TRAY mounted on PARTIAL HANDRAIL |
PIVOTING TOOL TRAY |
PARTIAL HANDRAIL |
|
|
|
|
|
|
| HANDRAIL FULL LENGTH | HANDRAIL FULL SET |
TELESCOPING TOP & MID RAIL CONNECTORS |
BOOSTER STEP | TELESCOPING LEG EXTENDERS | SPRING WHEELS |
 |
 |
|
 |
  |
 |
Features
| MODEL # | MODEL NAME |
DIMENSIONS |
WEIGHT |
DESCRIPTION |
FEATURES |
|
CP108 |
CONNECTING PLANK | 10" X 8' | 9 kgs / 20 lbs |
CONNECTS 10" DECK WIDTH JOE SCAFFOLD UNITS TOGETHER PLANK ABLE TO BE FASTENED TOGETHER BETWEEN 2 JOE SCAFFOLD UNITS TO FORM A CONTINUOUS STRAIGHT WORKING SURFACE ABOUT 18' LONG. SET CONNECTING PLANK WITH 2 JOE SCAFFOLD UNITS FOR 90 DEGREE WORK SURFACE AR0UND 1 ('L' PATTERN) OR 2 ('U' pATTERN) CORNERS. |
CONNECTING END TABS |
|
CP184,5,8,0 |
WIDE CONNECTING PLANK | 18" X 4', 5', 8', 10' | 7/13/18/25kgs 15/28/39/55 lbs | CONNECTS 18" DECK WIDTH JOE SCAFFOLD UNITS TOGETHER PLANK ABLE TO BE FASTENED TOGETHER BETWEEN 2 JOE SCAFFOLD UNITS TO FORM A CONTINUOUS STRAIGHT WORKING SURFACE UP TO ABOUT 20' LONG. sET CONNECTING PLANK WITH 2 JOE SCAFFOLD UNITS FOR 90 DEGREE WORK SURFACE AR0UND 1 ('L' PATTERN) OR 2 ('U' pATTERN) CORNERS. | LOCKING END TABS |
| HRT12 | HAND RAIL MOUNTED TOOL TRAY |
12" square x 2" walled tray |
1.5 kgs / 3 lbs |
KEEPS TOOLS WITHIN EASY REACH | ATTACHES TO EITHER HANDRAIL |
| PTT12 | PIVOTING TOOL TRAY |
12" square x 2" walled tray |
2 kgs / 4 lbs |
KEEPS TOOLS WITHIN EASY REACH | SELF SUPPORTING |
|
HR033 |
PARTIAL HAND RAIL | 3' X 3' |
2 kgs / 4 lbs |
DECK SAFETY RAIL INCLUDE LONG PIN CONNECTORS WHICH INSERT AND LOCK INTO RECEIVERS UNDER DECK. | SAFE MOUNTING AND DISMOUNTING |
| HRFL | FULL LENGTH HANDRAIL | 4', 5'3" Length x 36" height | 4 kgs / 9 lbs | BRACKETS BOLT ON BOTH ENDS OF DECK TO ACCOMMODATE PINS AT BASE OF HANDRAIL | FULL DECK LENGTH GUARDRAIL |
| TMRC | TELESCOPING MID RAIL CONNECTOR | 7' Closed / up to 13' open |
3 kgs / 7 lbs |
MIDRAIL FOR 8 OR 10' CONNECTING PLANK | ADJUSTMENT HOLES, LOCKING SPRING CLIPS |
| TTRC | TELESCOPING TOP RAIL CONNECTOR | 7' Closed / up to 13' open |
3 kgs / 7 lbs |
TOPRAIL FOR 8' OR 10' CONNECTING PLANK | ADJUSTMENT HOLES, LOCKING SPRING CLIPS |
| HRFS | HANDRAIL FULL SET | 3' X 18'-20' | 15 kgs / 43 lbs | 2 - HRFL's with 1- TMRC & 1 - THRC | FULL SET GUARDRAILS |
| BB012 | BOOSTER STEP | 18" X 18" X 12" HIGH | 6.5 kgs / 14 lbs | INCREASE HEIGHT OF CONNECTING PLANK BY 12" | 4 - WING NUT CLAMPS MOUNT STEP TO EITHER END OF DECK |
|
TLE36 TLE 42 |
TELESCOPING LEG LEVELLERS |
tightly fit inside legs, locking pin | 2.5 Kgs / 6 lbs | LEVELLERS ALLOW UNIT TO REMAIN LEVEL WHILE WORKING ON UNEVEN GROUND, INCREASE WIDTH OF FOOTPRINT & GAIN EXTRA HEIGHT | 12 INCREMENTAL LOCKING POSITIONS |
| RFW04 | SPRING WHEELS | 4" | 1.5 kgs / 3.5 lbs | INDOOR APPLICATIONS: TWO NYLON WHEELS ATTACHED TO END OF CENTRE LEG (BOTH ENDS) WITH SPRING MECHANISM WHICH DISENGAGES WHEN UNIT MOUNTED | ALLOWS UNIT TO ROLL WHEN NOT MOUNTED |
| LPW05 | LOCKING & PIVOTING WHEELS | 5" | 9 kgs / 20 lbs | SPECIAL ORDER: SWIVEL PLATE URETHENE/ NYLON WHEEL CASTERS COATED WITH BRIGHT ZINC WITH TOTAL BRAKE | PUSH BUTTON ANGLE ADJUSTMENT |
| RPW05 | RIGID PLATE WHEELS | 5" | 9 kgs / 20 lbs |
SPECIAL ORDER: RIGID PLATE URETHENE/NYLON WHEEL CASTERS COATED WITH BRIGHT ZINC |
PUSH BUTTON ANGLE ADJUSTMENT |
|
18" wide deck models are OSHA & ANSI compliant. They are certified compliant with the WCB of B.C. & the CSA's safety standards. Certified for use in the Provinces of Alberta & Ontario. |
PRODUCTS PAGE 5 step model 4 step model 3 step model ACCESSORIES
